Connections - Sharp PN-L703W Manuel D'installation

Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
1
2
3
For power outlet
TIPS
• Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. The factory settings are
shown below.
Input mode Audio input terminal (Factory setting)
D-SUB1 Audio1 input terminal
D-SUB2 Audio2 input terminal
DisplayPort DisplayPort input terminal
HDMI1 HDMI 1 input terminal
• To use a touch panel with a computer connected to the video input terminal on this monitor, the touch panel and computer
must be connected, and Touch Panel Settings Tool, Touch Pen Utility, and Pen Software must be installed on the computer
from the supplied CD-ROM.
When the Touch Display Downloader is installed, you can check and download the most recent versions of the software
programs.
• To use a touch panel with a computer connected to the bottom, connect to the USB 1 port.
To use a touch panel with a computer connected to the side, connect to the USB 2 port.
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
• Download the setup program for the Touch Viewer with the Touch Display Downloader.
• To display a computer screen on the monitor by wireless, use MirrorOp for SHARP and the built-in Wireless controller.
In Wireless mode, a touch panel can be used even with a computer that does not have Touch Panel Settings Tool or Touch
Pen Utility installed.
• To install and use the software, see the manual for each.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing, LLC in the United States and other countries.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
• Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• MirrorOp is a registered trademark of Awind, Inc.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
8
E

Connections

4 5 6 7 8 9
1. AC input terminal
19
2. Power cord (Supplied)
3. External speaker terminals
20
4. Audio output terminal
21
5. DisplayPort output terminal
6. Touch pen adapter port
13
7. USB 1 port (for touch panel)
8. LAN terminal
14
9. D-sub 1 input terminal
10. DisplayPort input terminal
15
11. HDMI 1 input terminal
12. Audio 1 input terminal
16
13. RS-232C input terminal
14. USB 2 port (for touch panel)
17
15. D-sub 2 input terminal
16. HDMI 2 input terminal
18
17. HDMI 3 input terminal
18. Audio 2 input terminal
Wireless controller terminals
10 11 12
19. Wireless adapter port
20. USB port
21. LAN terminal
Input mode Audio input terminal (Factory setting)
HDMI2 HDMI 2 input terminal
HDMI3 HDMI 3 input terminal
Direct Drawing Audio1 input terminal
Wireless Wireless