Av In1/Av In2 Input - Audiovox VME 9520 NAV Mode D'emploi

AV IN1/AV IN2 Input

Auxiliary Audio/Video Input
AV IN1 Auxiliary Audio/Video Input:
The unit contains an auxiliary audio/
video input which can accept signals
from various audio/video devices. The
A/V INPUT on the front panel (refer-
ence Item 9, Controls and Indicators)
accepts a 3.5mm connector which has
three female color coded RCA connec-
tors on the opposite end. The yellow is
used for video, the red accepts the right
channel audio and the white accepts
the left channel audio.
Perform the following steps to access
audio/video using the unit's A/V INPUT:
1. Turn on the video /audio source
component. Refer to the owner's
manual for instructions.
2. Connect the device's output signal
to the unit using the three RCA
inputs (Yellow= Video, Red=Right
Audio, White=Left Audio).
3. Press the unit's on-screen MENU
button and select AV IN1.
4. Use the controls located on the
device to begin playback and other
control functions.
AV IN2 Auxiliary Audio/Video Input:
The unit contains a rear auxiliary audio/
video inputs (AUX IN R, AUX IN L, AUX
IN VIDEO) which can accept signals
from various audio/video devices. The
yellow is used for video, the red ac-
cepts the right channel audio and the
white accepts the left channel audio.
Perform the following steps to access
audio/video inputs using the unit's
REAR AUX IN:
1. Turn on the video /audio source
component. Refer to the owner's
manual for instructions.
2. Connect the device's output signal
to the unit using the three RCA
inputs (Yellow= Video, Red=Right
Audio, White=Left Audio).
3. Press the unit's on-screen MENU
button and select AV IN2.
4. Use the controls located on the
device to begin playback and other
control functions.
31