Managing Incoming Calls - Audiovox VME 9520 NAV Mode D'emploi

Bluetooth

Managing Incoming Calls

Managing Incoming Calls:
When connected to a Bluetooth phone,
the unit will mute audio output, pause
disc play, and change to the Bluetooth
screen when a call is received.
The incoming phone number and
assigned name for that number will
appear in the middle of the screen. An
audible tone will sound from the unit
and a graphic display will appear on the
front panel. If the incoming call has no
caller ID, the unit will display "Private
Caller".
Answering an Incoming Call:
To answer the call, press the Call but-
ton. For best reception, speak loudly
and clearly toward the external micro-
phone. To end the conversation, press
the Hangup button.
Rejecting an Incoming Call:
Press the Hangup button to reject
an incoming call. The call will revert
to your wireless phone and be left for
voice mail.
Volume Control:
To increase or decrease the volume
level, turn the PWR-VOL knob on the
front panel.
Audio Mute:
To mute the phone call audio from the
unit when a call is received, press the
Mute button. Press the Mute but-
ton again and the phone call will be
restored to the unit.
25