Making Calls - Audiovox VME 9520 NAV Mode D'emploi

Bluetooth

Making Calls

Make a call (keypad direct entry):
1. Press the front panel MENU but-
ton and then press the Bluetooth
icon to access the Bluetooth main
menu.
2. Pair the phone with the unit.
3. Press the Direct Entry but-
ton to view the keypad.
4. Enter a phone number and then
press the
Make a call (using lists):
1. Press the front panel MENU but-
ton and then press the Bluetooth
icon to access the Bluetooth main
menu.
2. Pair the phone with the unit.
3. Touch to view one of the following
phone lists: Missed Calls, Re-
ceived Calls, Dialed Calls or Phone
Book. If you did not yet sync your
phonebook, see "Bluetooth Setup
Menu" on page for syncing instruc-
tions.
4. Use the Up/Down buttons to navi-
gate the list.
5. Touch to select a number.
6. Touch the number again to dial.
button.
Cancel call in progress:
To cancel a call in progress, touch the
Hangup button at the bottom of the
screen.
Transfer call in progress:
To transfer a call in progress from the
radio back to the mobile device, press
the Transfer button at the bottom of the
screen.
Mute call:
To mute the phone call audio from the
unit when a call is received, press the
Mute button. Press the Mute but-
ton again and the phone call will be
restored to the unit.
External Microphone:
When a call is received, you can
communicate with the caller using
the unit's internal microphone or an
optional external microphone. An
external microphone (included with the
VME 9520NAV) will, in some instances,
improve the sound quality during com-
munication.
The default setting for the unit is the
internal microphone. Pressing the
External Mic button will enable audio
output to the optional external micro-
phone (if connected).
24