Getting Started - TFA WEATHER PRO Mode D'emploi

CAUTION
Unauthorized repairs, alterations or changes to the devices are prohibited.
y
Do not expose the devices to extreme temperatures, vibrations or shocks.
y
y Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
The base station is only suitable for indoor use. Protect it from moisture!
y
Elements
Wireless weather station (base station) (Fig.1)
Display
INDOOR display (Fig.1-A) CLOCK & DATE display (Fig.1-B)
Fig.1-A1 Indoor temperature Fig.1-B1
Fig.1-A2 Indoor humidity Fig.1-B2
Fig.1-A3 Alert symbol HI/LO Fig.1-B3
Fig.1-A4 Trend arrows Fig.1-B4
RAIN display (Fig.1-D) WIND display (Fig.1-E)
Fig.1-D1 Reception symbol
Fig.1-E1
rain sensor
Fig.1-D2 Battery symbol Fig.1-E2
rain sensor
Fig.1-D3 Animated rain symbol Fig.1-E3
(when it is raining) Fig.1-E4
Fig.1-D4 Today rainfall graph
Fig.1-D5 Today rainfall amount Fig.1-E5
Fig.1-D6 Rainfall interval and
alert symbol
Fig.1-D7 Rainfall amount of the
last hour, the last
24 hours, 7 days,
current month, year
and the total amount Fig.1-E6
of rainfall, history of
the last 12 individual
months Fig.1-E7
Fig.1-E8
Fig.1-E9
Fig.1-E10 Wind interval
Buttons Housing
Fig.1-G RAIN button Fig.1-P
Fig.1-H WIND button Fig.1-R
Fig.1-J TEMP button Fig.1-S
Fig.1-K + button
Fig.1-L - button
Fig.1-M SET button
Fig.1-N CHANNEL button
Fig.1-O ALERTS button
OUTDOOR display (Fig.1-C)
Fig.1-C1 Symbol for
DCF symbol
Time alternating channels
Date and weekday Fig.1-C2 Channel number
Battery symbol base station Fig.1-C3 Outdoor temperature
Fig.1-C4 Outdoor humidity
Fig.1-C5 Alert symbol HI/LO
Fig.1-C6 Battery symbol tempera-
ture-humidity sensor
Reception symbol
Fig.1-C7 Reception symbol tem-
wind sensor
perature-humidity sensor
Animated wind wheel symbol
Fig.1-C8 Trend arrows
(when it is windy)
Battery symbol wind sensor
Prevailing wind direction of
FORECAST display (Fig.1-F)
the last hour
Fig.1-F1 Bar graph indication of
Current wind speed or
atmospheric pressure for
maximum wind speed
the last 24 hours
showing time and date of
Fig.1-F2 Relative atmospheric
recording of the last
pressure
24 hours, 7 days, the current
Fig.1-F3 Weather symbols and
month and year, history of
trend indicator
the last 12 individual months
Average wind speed
(10 minutes) or maximum
wind speed (1 hour)
Alarm symbol
Windchill factor
LCD wind rose with
16 wind directions
Wall mounting holes
Battery compartment
Stand (fold out)
18
Temperature-humidity sensor (Fig.2)
Display Button & housing
Fig.2-A Channel 1,2,3 Fig.2-F
Fig.2-B Transmission signal
Fig.2-G
Fig.2-C Temperature
Fig.2-D Humidity
Fig.2-H
Fig.2-E Battery symbol
Fig.2-J
Wind sensor (Fig.4)
Housing
Fig.4-A Wind wheel Fig.4-F
Fig.4-B Solar panel Fig.4-G
Fig.4-C LED signal light Fig.4-H
Fig.4-D Wind vane Fig.4-J
Fig.4-E Opening for attaching Fig.4-K
the adjustable base

Getting started

Insert the batteries
Place the base station and all transmitter on a table at a distance of about 1.5 meters from each other.
y
Avoid being close to possible sources of interference such as electronic devices and radio equipment.
Temperature-humidity sensor
Open the battery compartment of the temperature-humidity sensor (Fig.2-H) and insert two new AA 1.5 V
y
batteries, polarity as illustrated. All LCD segments will be displayed for a short moment.
y The transmitter's display shows the current temperature and humidity (Fig.2-C+D). The switch is set to
channel 1 (Fig.2-G).
y Close the battery compartment.
Rain sensor
y Open the two tabs (Fig.3-B) on each side of the rain sensor and lift the funnel portion (Fig.3-A)
off the base (Fig.3-C).
y Open the battery compartment (Fig.3-D) and insert two new AA 1,5 V batteries. Make sure the polarities are
correct (see marking on the cover).
y Close the battery compartment.
y Remove the transport lock of the rocker (Fig.3-E).
Close the housing cover and lock it.
y
Wind sensor
y Mount the wind sensor (Fig.4-E) on the adjustable base (Fig.4-H). Tighten the two screws (Fig.4-F).
Open the battery compartment at the bottom of the device (Fig.4-G) and insert three new batteries 1,5 V AA,
y
polarity as illustrated.
y Close the battery compartment.
With the solar panel (Fig.4-B) the battery life will be extended.
y
y The LED signal light (Fig.4-C) is fl ashing.
Base station
Remove the protective fi lm from the base station display.
y
Insert the three new batteries 1,5 V AA into the battery compartment (Fig.1-R) of the base station.
y
Make sure the polarities are correct.
The device will alert you with a beep and all LCD segments will be displayed for a short moment.
y
y The indoor temperature and humidity appear on the display (Fig.1-A1+A2).
Rain sensor (Fig.3)
Housing
TX button Fig.3-A Funnel
Fig.3-B Locking tabs
1 2 3 switch for
Fig.3-C Base
channel selection
Fig.3-D Battery compartment
Battery compartment
Fig.3-E Rocker
Support for wall
mounting or table Fig.3-F 4 screw holes
for mounting
standing
2 screws for fi xing
Battery compartment
Adjustable base (180° rotatable)
Fixing screw
4 screw holes for mounting
19