Mounting The Handlebar - PROPAIN Tyee CF Manuel D'utilisation

// MOUNTING THE HANDLEBAR

1
1. Unscrew the stem clamp bolts.
2. Remove the handlebar clamp and the bolts.
3
1. Center the handlebar and adjust the angle of the handlebar according to your personal preferences.
2. Adjust the brake levers and the shifters to the angle of the handlebar.
2
1. Attach the handlebar to the stem.
2. Attach the handlebar clamp and screw in the bolts a few
turns by hand.
4
1. Screw in the two upper clamping bolts and tighten both
bolts with the torque lasered on the clamp or stem.
2. Screw in the two lower clamping bolts and tighten both
bolts with the torque lasered on the clamp.