PROPAIN Tyee CF Manuel D'utilisation page 10

// INFLATING THE TIRE
1
1. Release the air from the tire completely.
2. Unscrew the valve cap.
3. Unscrew the valve insert from the valve using the valve
key supplied.
2
1.
2.
per tire.
3. Screw the valve insert into the valve using the valve key
and tighten it by hand.
3
1.
2.
The tire must contact the rim evenly around its
entire circumference. If not, release the air, press
the tire into the center of the rim bed and repeat
the procedure.
Have the tire seat checked by a professional if in
any doubt.
3. Slowly rotate and shake the wheel to distribute the
4. After the tire bead is fully seated, reduce the pressure to
your own requirements.
5. Screw on the valve cap.
6. Carry out a short test ride and check the tire pressure
regularly.