PROPAIN Tyee CF Manuel D'utilisation page 32

TASK/CHECK
The front and rear wheel must lock when the brake lever is pulled.
Check the bite point of the brakes: Pull one brake lever after the other while standing.
The bite point must be felt around half way down the brake lever travel.
Check the brake pads for wear.
Check the disc rotor for wear.
It should not be possible to turn the handlebar with normal force.
Check the headset for play: Stand next to your bike, pull the front brake lever and gently push the bike backwards and forwards.
No bearing play must be detectable.
Make sure that all components are tight.
Tighten loose parts to the proper torque (see „8.3 Torques"). In case of doubt, contact the PROPAIN Service.
It should not be possible to turn the saddle or seat post.
It shall not be possible to twist the grips by hand.
Before each ride
X X
X X
X
X
X
X X
X X
X X
X
X