// USER MANUAL
7.1
SERVICING THE COMPONENTS
COMPONENT TASK
Complete bike
Check tightening torques of all screws.
Torque values, see „8.3 Torques".
Frame
Visual inspection of the frame for damage such as cracks and deformations,
Suspension fork and
Visual inspection for damage such as cracks and deformations as well as
rear shock
discoloration.
Small service
Full service
Headset
Disassemble, clean, grease and reassemble all parts of the headset.
Replace poorly running or corroded bearings.
Seat post
Disassemble, clean the seat post and seat tube of the frame and assemble it
without using lubricants.
Check the tightening torque. Torque of the seat post clamp and saddle clamp, see
„8.3 Torques".
INTERVAL
100 to 300 km
or 5 to 15 h*
then every
1500 km or 75 h*
3 months
3 months
6 months
3 months