Control Panel; Cycle Selection Charts - Kenmore 665.17432 Guide D'utilisation

Cycle Selection Charts

Press the desired cycle. Turn the Cycle Control knob to the
desired cycle. If the door is latched, you will hear the cycles start
and stop as the Cycle Control knob passes each cycle mark. This
is normal and does not hurt the dishwasher. If you prefer, you can
set the Cycle Control knob with the door unlatched.
A " " shows what steps are in each cycle.
Water usage is shown in U.S. gallons/liters.
Cycle time includes dry time. An asterisk ( * ) by the cycle time
indicates the cycle time might be longer depending on the
temperature of the water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot
enough, the cycle time will be as shown.
NOTE: The Cycle Control knob pauses while water is being
heated.
Use this cycle for hard-to-
clean, heavily-soiled pots,
pans, casseroles, and
regular tableware.
Wash Rinse Rinse Main
Wash
Use this cycle for loads
with normal amounts of
food soil. (The energy-
usage label is based on
this cycle.)
Wash Rinse Rinse Main
Wash

Control Panel

Use both
detergent
dispenser
sections.
Rinse Rinse Dry Time
(min)
*
97
Use both
detergent
dispenser
sections.
Rinse Rinse Dry Time
(min)
*
89
Use this cycle for pre-
rinsed and lightly-soiled
loads. This cycle uses
less hot water than the
Normal Wash cycle.
Wash Rinse Rinse
Use this cycle for china
and crystal. This cycle
uses a light wash and
gentle dry. The Air Dry
option is automatic with
this cycle, and the heater
is turned off.
Wash Rinse Rinse
Water
Usage
(gal/L)
8.6/32.6
Water
Usage
(gal/L)
7.2/27.3
Use
covered
detergent
dispenser
section.
Main Rinse Rinse Dry
Wash
Use
covered
detergent
dispenser
section.
Main Rinse Rinse Dry
Wash
Time Water
(min) Usage
(gal/L)
* 5.8/22.0
84
Time Water
(min) Usage
(gal/L)
* 5.8/22.0
84
13