Ignition Switch - GOLDONI MY SPECIAL Serie Emploi Et Entretien

GOLDONI S.p.A.
MY SPECIAL 15
See engine's operation
manual.
IMPORTANT
Carefully follow the instructions to start
the engine pulling strap
EN Inglese
and maintenance

Ignition switch

Insert the key and turn it as described
●
below:
Forward 0
No circuit powered.
Forward 1
Insert
clockwise to the first position (the
electrical circuit will be powered).
Forward 2
Engine starts.
Each starting attempt should last for just a few
seconds.
Do not make consecutive attempts to start the
engine without having waited at least 20 sec.
between one attempt and the next, otherwise the
battery will quickly run down and the starter motor
could be damaged.
WARNING
Do not keep operating the starter motor
when the engine has already started.
Damage to the starter motor due to
failure
instructions will not be covered by the
warranty.
After the engine has started:
Release the key. It will automatically return
●
to the operating position
94
the key and
to comply with
OPERATING INSTRUCTIONS
MY SPECIAL
turn it
these