GOLDONI S.p.A.
POWER TAKE-OFF
Rear power take-off (PTO)
WARNING
when the PTO is not used, move the
mode selector lever to the Neutral or
Independent position (depending on
the model or version). This prevents
the shaft of the PTO and other spinning
components from accidentally turning.
WARNING
Cover the PTO shaft with the guard
when not in use.
The PTO
is engaged by means of the
PTO lever
and, when the machine is at a
standstill, with the Gear Stop raised.
The tractor is equipped with a rear power take-off
able to function in the following mode:
Independent.
●
By using the lever
possible:
540 - 890 rpm with 3000 engine rpm
Counter-clockwise rotation.
EN Inglese
the following speeds are
Power take-off 26 UNI 220 profile
Implement hitching lever
PTO shaft guard.
IMPORTANT
The two-wheeled tractor is equipped
with a safety device that prevents the
reverse gear from being engaged when
the PTO is engaged, in the normal
operating direction. Set the PTO to the
neutral position before engaging the
reverse gear.
101
MY SPECIAL
OPERATING INSTRUCTIONS