GOLDONI S.p.A.
Avoid Tipping
Slopes are a major factor related to loss
●
of control and tip-over accidents, which
can result in severe injury or even
death.
All operations that take place on
sloping ground require extra caution.
Do not work on muddy or soft ground.
●
Do not work on excessively steep
●
slopes.
Take the greatest care when working
●
on slopes.
Always make sure that you have a firm
●
foothold on slopes.
Always work the soil across slopes,
●
never
in
the
directions.
Watch out for holes, ruts, bumps, rocks
●
or other hidden objects. Uneven terrain
could
cause
overturn. Tall grass can hide obstacles.
Take
the
●
grass. Tires may lose their grip on
slopes even though the brakes are
functioning properly.
Choose a low ground speed so you will
●
not have to stop or shift gear on the
slope.
Always keep the gear engaged when
●
going
down
downhill with the machine in neutral.
Avoid starting, stopping or turning on
●
slopes. If the tires lose their grip,
EN Inglese
uphill
or
downhill
the
machine
utmost
care
on
slopes. Never
disengage
slowly, straight down the slope.
Keep all movement on slopes slow and
●
gradual. To not make sudden changes
in speed or direction as this could
cause the machine to tip over.
Take the greatest care when using the
●
machine
embankments or bodies of water. The
machine could suddenly tip over if a
wheel goes over the edge or the edge
caves in. Allow for a safety area
between the machine and any hazard.
The risk of tipping over increases to a
●
considerable extent if the tires have
been regulated with a narrow track
width and the machine is driven at high
speed.
Comply
●
recommendations for wheel weights or
counterweights, which can increase
stability when work is carried out on
slopes or when front or rear-mounted
implements
weights when they are not required.
Slopes are a major factor related to loss
●
of control and tip-over accidents, which
can result in severe injury or even
to
death. All operations that take place on
sloping ground require extra caution.
wet
coast
77
MY SPECIAL
the
PTO
and
near
ravines,
with
the
manufacturer's
are
used. Remove
proceed
ditches,
the
SAFETY