Milwaukee M18 FUEL Manuel De L'utilisateur page 3

Masquer les pouces Voir aussi pour M18 FUEL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the
risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Do not modify or attempt to repair the appliance
or the battery pack (as applicable) except as
indicated in the instructions for use and care.
SPECIFIC SAFETY RULES FOR
WET/DRY VACUUM
• Never use vacuum without tank and filter prop-
erly installed.
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• This product is suitable for collection of silica
dust when used in accordance with these in-
structions. To reduce the risk of health hazards
from other vapors or dust, do not vacuum car-
cinogenic, toxic or hazardous materials such
as asbestos, arsenic, barium, beryllium, lead,
pesticides or other health endangered materials.
WARNING
in dusty situations, wear appropriate respira-
tory protection or use an OSHA compliant dust
extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
WARNING
grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
To reduce the risk of
injury, when working
Some dust created by
power sanding, sawing,
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
READ AND SAVE
ALL INSTRUCTIONS
FOR FUTURE USE
FOR HOUSEHOLD OR COMMERCIAL USE.
SYMBOLOGY
Volts
Direct Current
Read Operator's Manual
Wear Eye Protection
Do Not Step
Unlock
Lock
Max Power Mode
Off
Max Run-Time Mode
UL Listing for Canada and U.S.
US
C
SPECIFICATIONS
Cat. No. ...................................... 0910-20, 0911-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Air Flow .......................................................87 CFM
Suction.................................................... 60 in H2O
Capacity* .............................................. 6 gal (23 L)
Recommended Ambient
Operating Temperature ......................0°F to 125°F
* Gallons indicated reflect drum volume, not necessarily
collection capacity, actual capacity dependent upon type
of debris collected, condition of filter and other factors.
6 Gallon Wet/Dry Vacuum Tank included with 0910-20 only.
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0910-200911-20

Table des Matières