Setting The Hot Water Programme (Programming Dispensing Quantity); Looking Up The Number Of Coffees Dispensed, Number Of Jugs Dispensed And Number Of Descaling Procedures (Statistics) - Electrolux CG 6600 Mode D'emploi

g
13.7 Setting the hot water
programme (programming
dispensing quantity)
The appliance is preset to a normal
quantity at the factory. You can
change and save this quantity:
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option «HOT
WATER PROGRAM» appears.
0 A bar appears on the display, which can
be made bigger or smaller; this repre-
sents the hot water quantity that is
dispensed. If necessary a different fill-
ing quantity can be selected using the
scrolling buttons "<" or ">" (Figure 6)
in 10 steps.
When the bar is completely full, this
3
represents the max. hot water quantity,
which can be dispensed at once, of
about 250-280 ml.
0 When the desired quantity is displayed,
confirm itwith the"OK" button (Figure
6). This filling quantity is now pro-
grammed in.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
The display automatically jumps back
3
to the menu option «HOT WATER
PROGRAM» after programming.
0 To go back to the coffee mode, press
the "MENU" button (Figure 5) or wait
about 120 seconds until the appliance
automatically jumps back to coffee
mode.
54
All manuals and user guides at all-guides.com
13.8 Looking up the number of
coffees dispensed, number of
jugs dispensed and number of
descaling procedures (statistics)
The appliance allows the following
values to be looked up:
– the total number of coffees made
with the appliance up to that point,
– the number of jugs made with4
cups, with 6 cups, 8 cups and 10
cups,
– the number of cappuccinos made,
and also
– the number of descaling procedures
carried out.
If 2 cups of coffee are dispensed at the
3
same time then these are counted as 2
cups.
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«STATISTICS» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). Then number of
cups dispensed until that time appears
on the display, e.g. «TOT. COFFEES
135» for 135 coffees dispensed.
0 Repeatedly press the scrolling buttons
"<" or ">" (Figure 6) to display the
number of jugs dispensed for each
number of cups possible in the jug pro-
gramme (4 cups, 6 cups, 8 cups, 10 cups).
The number of jugs made with the
respective number of cups appears on
the display, e.g. «JUG 4 CUPS 12»
for 12 jugs made with 4 cups.
0 Repeatedly press the scrolling button
">" (Figure 6) to show the number of
descaling procedures carried out, e.g.
«TOT. DESCALES 5» for 5 descaling
procedures.
0 To go back to the coffee mode, press
the "MENU" button (Figure 5) twice or
wait about 120 seconds until the
appliance automatically jumps back to
coffee mode.