Setting The Switch-Off Time; Setting The Jug Programme (Coffee Strength And Filling Quantity For The Jug) - Electrolux CG 6600 Mode D'emploi

0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows the current setting, e.g.
«TEMPERATURE HIGH».
0 If necessary, select another tempera-
ture with the scrolling buttons "<" or
">" (Figure 6).
0 When the desired temperature is dis-
played, confirm it with the"OK" button
(Figure 6). This temperature is pro-
grammed in accordingly.
If "OK" is not pressed, the appliance
3
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
The display automatically jumps back
to the menu option
«TEMPERATURE» after program-
ming.
0 To go back to the coffee mode, press
the "MENU" button (Figure 5)or wait
about 120 seconds until the appliance
automatically jumps back to coffee
mode.

13.3 Setting the switch-off time

If the appliance is not used for a while
it switches itself off automatically for
safety and energy saving reasons.
You can choose between 3 switch-off
times (automatic switch-off after 1 to
3 hours):
«AUTO SHUTOFF TIME 1 H»
«AUTO SHUTOFF TIME 2 H»
«AUTO SHUTOFF TIME 3 H»
The factory setting is «AUTO SHUT-
OFF TIME 1 H». You can change this
as follows:
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«AUTO SHUTOFF TIME» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows the current setting, e.g. «AUTO
SHUTOFF TIME 1 H».
All manuals and user guides at all-guides.com
13.4 Setting the jug programme
0 If necessary, select another switch-off
time with the scrolling buttons "<" or
">" (Figure 6).
0 When the desired switch-off time is
displayed, confirm it with the"OK" but-
ton (Figure 6). This switch-off time is
programmed in accordingly.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
The display automatically jumps back
3
to the menu option «AUTO SHUT-
OFF TIME» after programming.
0 To go back to the coffee mode, press
the "MENU" button (Figure 5) or wait
about 120 seconds until the appliance
automatically jumps back to coffee
mode.
(Coffee strength and filling
quantity for the jug)
The jug programme is preset to normal
values at the factory. You can adjust
and change this to suit your taste. The
coffee strength can be adjusted in
5 steps from extra mild to extra strong
and the filling quantity can be
adjusted in 10 steps with the aid of a
graphic bar.
You can change these settings as fol-
lows:
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option «JUG
PROGRAM» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows «JUG COFFEE TASTE».
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows the current setting, e.g.
«EXTRA-MILD JUG».
0 If necessary select a different coffee
strength in 5 steps from extra mild to
g
51