Garmin StreetPilot c340 Guide De Référence Rapide page 2

Step 1: Mount Your c340
To ensure a tight grip, clean and dry your windshield before mounting the suction cup.
E
N
1
1. Plug the small end of the cable into the
mount and the other end in a 1-Volt
receptacle in your vehicle.
. Place the suction cup on the windshield.
3. Flip the lever back, toward the
windshield.
If necessary, use the tension knob to loosen or tighten the tension in the mount to improve
your viewing angle.
Warning: This product contains a non-user-
replaceable lithium-ion battery. Do not remove
or attempt to remove the battery. Doing so could
result in risk of battery fire or damage and injury.
To prevent damage and risk of fire due to high
temperatures, remove the unit from the vehicle
or store it out of direct sunlight. For more
2
3
4. Fit the bottom of your c340 into
5. Tilt your c340 back until it snaps
information, see www.garmin.com\safety.
Check your state and local traffic laws before
mounting. Currently, state laws in California and
Minnesota prohibit drivers from using suction
mounts on their windshields while operating
motor vehicles. Other Garmin dashboard or
friction mounting options should be used.

5
4
Tension knob
the cradle of the suction cup
mount.
in place.