Removing Clogs - Dustbane QS1 Manuel D'utilisation

Hose
Tuyau
Manguera
Cover (Suction Inlet)
Couvercle (Entrée
d'aspiration)
Cubierta (Abertura
de aspiración)
Short Hose
Tuyau court
Manguera
corta

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from
the nozzle up to the dust bag. If the
hose should become clogged:
➢ Turn off and unplug vacuum cleaner.
➢ Pull open suction inlet cover and
➢ Disconnect wand from short hose
➢ Plug in vacuum cleaner and turn on.
➢ Disconnect wand and stretch hose
➢ If clog still exists, turn vacuum
➢ Remove lower plate.
Short Hose
➢ Remove short hose from nozzle by
Tuyau court
Manguera
corta
➢ Inspect hose end and clear any
➢ Reinstall short hose and lower plate.
- 44 -
check for clogging.
and check wand and hose.
in and out to remove clog.
cleaner OFF and UNPLUG POWER
CORD.
lifting straight up.
obstructions.