Cleaning Agitator; Replacing Agitator - Dustbane QS1 Manuel D'utilisation

Card
Carte
Tarjeta

Cleaning Agitator

➢ Clean agitator after every five uses
➢ Turn off and unplug the vacuum
➢ Remove lower plate.
➢ Cut off any carpet pile and lint
➢ Remove agitator.
➢ Remove any string or debris located
➢ Reinstall agitator and lower plate.

Replacing Agitator

➢ When the bristles on the agitator are
➢ Turn off and unplug the vacuum
➢ Remove lower plate and agitator.
➢ Position belt over belt pulley on the
➢ Reinstall agitator and lower plate.
- 40 -
and every time the belt is replaced.
cleaner.
entangled around agitator with a
pair of scissors.
on the end caps, washers or agitator
shaft.
worn so that they do not touch a
card held across the lower plate, the
agitator should be replaced.
cleaner.
new brush unit.