Replacing Belt - Dustbane QS1 Manuel D'utilisation

Lift Agitator Up
Soulever l'agitateur
Inidad del agitador
Motor Shaft
Arbre
d'entraînement
du moteur
Eje del motor
Groove
Ouverture
Ranura

Replacing Belt

Belt
Courroie
Correa
End Cap
Bouchon
Tapa del extremo
➢ Turn off and unplug the vacuum
cleaner.
➢ Remove lower plate.
➢ Remove agitator by carefully lifting
out.
➢ Remove worn or broken belt.
➢ Clean agitator.
➢ Loop new belt (Type UB8 only)
around motor shaft and agitator
pulley; see illustration for correct
belt routing.
➢ Reinstall agitator back into nozzle
housing grooves.
➢ After reinstalling the agitator, turn it
by hand to make sure that belt is
not twisted or pinched and that all
rotating parts turn freely.
➢ Reinstall lower plate.
- 38 -