installation planning
EN
The table below lists kit requirements for each installation option. Please read it carefully.
Installation Type
Exterior
Remote Exterior
Remote Inline
1.3
DHC™ Plus kit overview
DHCP-BK
1 x blower housing assembly
1x inline cover assembly
1 x air damper assembly
1 x on/off switch / housing
1 x collar connector assembly
1 x collar plate assembly
2 x mounting bracket
1 x bushing
13 x #9x1/2" screws
7 x #8x1/2" screws
note:
These complete kits always comprise of up to 2 boxes. Please read carefully and ensure to order correct ap-
plication kits for your unique installation.
Though not supplied, armoured cable is required for the wiring of the DHC™ Plus (see "electrical information"
section for more information). Therefore, please ensure you have enough armoured cable on-hand to complete
your unique installation.
1.3.1 DHCP-BK
1
1/4"
Hex
0.141"
1/2"
#9-14 Thread, RH
0.348"
Ref.
1
2
3
4
4
W415-1789 / C / 01.29.19
DHCP-BK
Included in each kit:
1 x exterior housing assembly
1 x wall flashing
1 x decorative cover
12 x #9x1/2" screws
1/4"
0.141"
0.141"
1/2"
Hex
#9-14 Thread, RH
0.348"
1
2
3
2
4
Description
Hardware kit
On/off switch (with housing and nut)
Air damper assembly
Mounting brackets (x2)
DHCP-EK
N/A
DHCP-EK
1 x hot air exhaust assembly
1 x wall flashing
4 x #9x1/2" screws
1/4"
0.141"
0.141"
1/2"
Hex
2 x #10x1-1/2" screws
#9-14 Thread, RH
0.348"
3
4
5
6
7
Ref.
Description
5
Collar plate assembly
6
Collar connector assembly
7
Inline cover assembly
8
Blower housing assembly
9
Bushing
DHCP-HK
N/A
N/A
DHCP-HK
1/4"
0.141"
0.141"
1/2"
Hex
#9-14 Thread, RH
0.348"
29/64"
1/8"
1-1/2"
#10 Thread, RH
Quadrex Drive
9
8