Braun BrewSense Touch Screen Mode D'emploi page 10

English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy the new Braun
appliance.
Before Use
Please read instructions carefully and
completely before using the appliance.
Description of Parts and Accessories
1 On/Off button
2 Touch display and clock
3 Water reservoir incl. water level indicator
(inside)
4 Filter basket with anti drip system
5 Gold tone permanent filter
6 Reservoir cover and showerhead
7 Charcoal water filter
8 Charcoal water filter holder
9 Keep warm plate
10 Cord storage
11 Glass carafe
12 Flip lid (glass carafe)
13 Coffee measuring scoop
Maximum water capacity: 12 cups (60 fl. oz.)
Before first use
Before using the coffee maker for the first time,
after a long period of not using it, or after installing
a new charcoal water filter, run the coffee maker
through a complete brew cycle without ground coffee.
Use a full carafe (12 cups) of fresh cold water.
This will remove any dust from the manufacturing
process or residues that have remained in the unit.
Settings
Before using the coffee maker for the first time, set
«time of day» and «water hardness level» (see
explanation in dedicated paragraphs hereafter).
If during the setting process no function is selected
for 10 seconds, the function currently set will be
saved.
Time of day
When the coffee maker is first plugged in or when
power is restored after an interruption, the display
starts flashing 2:00 AM.
• Press and hold SET (e) to scroll through the
hours. Release it once the desired hour is
displayed.
10
• To set the minutes, press CLOCK. The minutes
start flashing.
• Press and hold SET to scroll through the minutes.
Release it once the desired minutes are
displayed.
• Press CLOCK again to save the desired time.
NOTE: When the number count passes 12, the PM
light will be displayed.
Water hardness level
Set the water hardness level on the coffee maker to
the water hardness level for your local area.
• The default setting (h3) is flashing.
• Press SET (e) to scroll through the options
(h1 = soft, h2 = normal, h3 = hard) and select the
appropriate water hardness level.
• Press CLEAN to save the hardness level.
• The pre-set water hardness disappears after a
few seconds and the time of day will show on the
LED control panel.
Touch Display
a. BREW
Use to start the brew cycle.
b. AUTO ON
Use to program the start time of the brew cycle.
The AUTO ON time can be set for any time, day
or night. «PM» is displayed on the LED for
nighttime program times.
c. CLEAN
Use to activate the descaling mode and set the
water hardness level.
d. CLOCK
Use to set time of day.
e. SET
Use to program the time of day, auto on and
water hardness level.
f. MODE
Use to select the brew mode (fast, regular or
bold).
g. 1-4
Use to get the optimal coffee flavor when
brewing smaller amounts (up to 4 cups).
h. FRESHNESS INDICATOR
Provides an indication of your coffee freshness
based on the period time it has been since
brewing start.