Sabiana Ocean ECM Instructions Pour L'installation, L'utilisation Et La Maintenance page 49

Modular Version installation
The assembly of the ventilation group, of the heat ex-
change batteries and the filter has to be done before
the installation.
Combination possibilities between fan unit and coil
sections for heating or heating/cooling can be found
from page p. 42.
The cooling batteries always have to be mounted
with horizontal air flow.
Junction of sections
The sections are joined by means of special blocks
already present on the Compact Versions, Modular
Sections and additional modules.
• Compact Versions can be joined with all available
additional modules
• Modular Sections can be reciprocally combined
and with all available additional modules
Place the additional sections and/or modules to be
connected next to each other and secure with the
supplied nuts and screws (see figures below).
Hangon systems
Compact Versions and Modular Sections can be in-
stalled by means of hangon brackets already present
outside the unit.
For hangon provide:
• threaded rods diameter M8
EN
49