Installation Instructions; Conversion To Propane (Lp) Or Natural Gas; Orifice Holder - GE ZGP364NDNSS Mode D'emploi

Installation
Instructions
WARNING
these instructions.
The pressure regulator and the burner orifices are set
WARNING
regulator and burner orifices for the gas to be used.
TOOLS YOU WILL NEED FOR
CONVERSION
1

ORIFICE HOLDER

The range orifice holder is located behind the front
access panel to access the orifice holder.
Use only the orifices specified in the
instructions for your range or rangetop.
22
Explosion Hazard

Conversion to Propane (LP) or Natural Gas

2
CONVERT THE REGULATOR(S)
the unit.
position.
desired gas is
bottom.
regulator.
3
CHANGE BURNER ORIFICES
INSTALLATION TIP:
all orifices and then start replacing
possibility that some may not be
replaced.
burner caps and burner heads.
small pliers to carefully lift out
the orifices.
The main orifice is
orifice is located
higher beside the
center of the burner.
Cap
NAT
LP
NAT LP
head
igniter
Orifice
Orifice
31-11125-2