Change Grill Orifice - GE ZGP364NDNSS Mode D'emploi

Installation Instructions for Gas Conversion
3
CHANGE BURNER ORIFICES (cont.)
IMPORTANT:
each orifice label to identify and install them in the
30" Models - SIMMER ORIFICES
30" Models - MAIN ORIFICES
138XN
these three burners.
36" and 48" Models
SIMMER
ORIFICES
MAIN
ORIFICES
the original storage location.
4
CHANGE GRILL ORIFICE (if present)
31-11125-2
for the right
front burner.
on all burners.
for all burners.
4
CHANGE GRILL ORIFICE (cont.)
baffle straight up and off.
from the top of the igniter.
side of the burner
surround.
surround.
C. Carefully push the
igniter aside and
under the burner. Do
not pull or pinch the
2 at the front and 2
the burner assembly
out of the gas inlet.
replace the orifice.
the unused orifice in
the holder for possible
future use.
electricity to unit are
turned off.
by pulling straight off.
be necessary to grasp the
Igniter
Front of Range