Fellow Corvo EKG Manuel D'instructions page 8

Turn Kettle ON/OFF
To turn Corvo EKG on, press main button and wait for LCD screen to light up. To turn Corvo EKG off,
press button and wait for LCD screen to turn black.
Select Display Temperature Setting
Choose your preferred temperature setting of Fahrenheit or Celsius by switching the temperature
toggle on the back of the base. See diagram 1D for reference.
Set a Goal Temperature
• Turn main button clockwise to increase SET temperature. The LCD screen will display temperature
(numerical) options as you twist.
• Once you arrive at your desired temperature, stop turning the button. Corvo EKG will display this
SET temperature for one second.
• On Corvo EKG's LCD screen, F or C will start blinking, indicating the kettle is heating to your desired
SET temperature.
Turn On HOLD Mode
Corvo EKG's HOLD mode allows the kettle to hit your desired SET temperature and maintain that SET
temperature for 60 minutes. This is an optional setting. See diagram 1D for reference.
• To turn HOLD mode on, switch the hold toggle on the back of the base so that the toggle reads
"HOLD." The screen will flash "HOLD ON" for one second.
• When Corvo EKG is in hold mode, "HOLD" will appear in the top of the LCD screen when your SET
temperature is reached. This indicates that the kettle is in hold mode. See diagram 1E for reference.
• Once in HOLD mode, set your goal temperature with the steps above (in "Set a
Goal Temperature").
• If you lift your kettle off of the base and then return it to the base, Corvo EKG will reset the 60
minute hold and continue heating your water.
BACK VIEW
HOLD
HOLD toggle
HOLD Indicator
F
F/C toggle
Diagram 1D
Current Temp.
Temp. Setting
Diagram 1E
6