• Do not fill above the 'max' fill point as displayed in the diagram below. Do not fill above this point. If
the kettle is overfilled, hot water may be ejected. See diagram 1C below for reference. We suggest
using only the amount you need to conserve water and energy.
• Do not operate dry or below the 'min' fill point. Dry boiling the kettle may result in permanent
damage and potential fire. The 'min' fill point is one inch above the floor of the kettle. See diagram 1C
above for reference.
• A short power-supply cord is provided to reduce risks resulting from becoming entangled in or
tripping over a longer cord.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not use a longer detachable power-supply cord or extension cord.
• Remove the kettle from its power base before filling. Remove all moisture on the bottom of the
kettle before placing it onto the power base.
• Kettle must be operated on a flat surface away from the edge of counter to prevent accidental
tipping.
• Never move the kettle and kettle base together while the unit it is in use.
• To avoid burns and risk of personal injury, use extreme caution when carrying kettle containing hot
water.
• Do not use the kettle if your hands are wet.
• Position the kettle properly on the power base before switching on.
• Use the kettle only with delivered power base. Do not use any other kettle on delivered base, or any
other base with delivered kettle. Use only the original, delivered pair together.
• After using kettle, wait until kettle has cooled down before removing lid.
• To avoid possible steam damage, turn spout away from walls or cabinets during use.
• Use protective pad under kettle after it has been heated to prevent damage to surfaces.
• To reduce the risk of fire or electric shock, do not remove bottom cover from base or disassemble
base or kettle in any way. There are no user-serviceable parts inside. Repair should be done by
authorized service personnel only. Opening base or kettle will result in a void of the one year
warranty.
max fill point
min fill point
Diagram 1C
4