Getting To Know Your Shark Ion Robot - shark ION ROBOT RV750C Instructions

GETTING TO KNOW YOUR
SHARK ION ROBOT™
WELCOME!
Congratulations on A
your purchase. Use this
instruction manual to
learn about your new
vacuum's great features.
From assembly to use
B
to maintenance, you will
find it all in here.
NOTE: When using for the
first time, fully charge and
discharge your Shark ION
ROBOT to condition the
battery. Failure to do so
may cause LED indications
D
to work incorrectly.
A Shark ION ROBOT
B Main Power Switch
C Charging Dock
D Charger
7
1-800-798-7398
C
E F
G H
E Hair Removal Tool
F Side Brush (x2)
G BotBoundary™ Strip
H BotBoundary Connectors (x2)
!
Dock
!
Dock
CLEAN BUTTON
To begin cleaning with your Shark ION
ROBOT™, press the CLEAN button.
Press button again to stop.
DOCK BUTTON
Press DOCK button to stop cleaning and
send the unit back to the charging dock.
SPOT BUTTON
For thorough cleaning of an area of
concentrated dust or debris, press the
SPOT button.
BATTERY CHARGE INDICATOR LIGHTS
The indicator lights display the amount of
charge remaining in the battery. See page
10 for more details.
Clean
Spot
Clean
Spot
"!" ERROR INDICATOR
When a blockage or a filter problem
occurs, the "!" error indicator light will
illuminate. Clear any blockages and clean
filters. Remove dust bin and make sure
nothing is blocking suction. See page 21
for a full list of error codes.
WI-FI INDICATOR
Illuminates blue when unit is connected
to Wi-Fi. If the icon illuminates red, the
connection has been lost. When the icon
is flashing blue, the robot is in setup mode.
When the icon is off, the robot has not been
set up to connect to the Internet.
s h a r kc l e a n . c o m
8