Product Description - Braun ThermoScan WelchAllyn PRO 4000 Mode D'emploi

6021360_PRO4000_S4-46 Seite 6 Montag, 20. August 2007 8:46 08
6
Package components
• Braun ThermoScan thermometer
• Use and Care Manual
• 2 Duracell Alkaline batteries
• Additional items my be included as noted on outer packaging

Product description

1. Probe cover
2. Probe
3. Probe cover detector/automatic «on»
4. Probe cover ejector
5. Display
6. «I/O mem» button (On/memory function)
7. «ExacTemp» light
8. Start button
9. Battery door
10. Protective cover
How to use your Braun ThermoScan
1.
To achieve accurate measurements, make sure a new, clean probe
cover (1) is in place before each measurement.
Use the following temperature taking technique:
2.
When the probe cover is in place, the thermometer turns on auto-
matically. Wait for the ready signal beep.
3.
Fit the probe snuggly into the ear canal, then push and release the
Start button (8).
If the probe has been properly inserted into the ear canal during the
complete measuring process, a long beep will signal the end of the
measuring process. The thermometer detects that an accurate temper-
ature measurement has been taken. The result is shown on the display
(5).
When you take a temperature measurement, the «ExacTemp» light (7)
can be of help. It flashes during