ENG - 26
To activate or deactivate "don't disturb" mode:
• Slide the slider-button up or down up to position "Don't disturb".
• Press the slider-button, the status of the "don't disturb" mode will flash.
• Slide the slider-button up or down.
• Press the slider-button again to confirm the status of the "don't
disturb" mode.
Nota:
activated or the call volume is at minimum.
To modify the call volume:
• Slide the slider-button up or down to position yourself on the "Ring
volume" option.
• Press the slider-button, the volume adjustment level will flash.
• Slide the slider-button up or down until the desired ring volume is
achieved.
• Press the slider-button again to confirm the ring volume setting.
4 Photo/video: Set the desired mode for capturing images of unanswered calls.
PHOTO MODE: Stores a photo of the person who made the call.
VIDEO MODE: Stores a video of the person who made the call.
Note:
side slot of the monitor.
VIDEODOOR ENTRY SYSTEM MONITOR
The
indicator will remain lit while the "don't disturb" mode is
For video mode insert a micro SD card (not included) into the