CAME BPT TH/350 Manuel D'installation Et D'utilisation page 61

Remote activation
By connecting a special interface to terminals 1-2 (see "Wiring" on page 8), it is possible to:
- force unit operation in manual mode remotely,
- activate a special fixed-period program configured in advance.
Forcing unit operation in manual mode remotely
Using a special remote command, users can make the device cancel any program in
progress and operate in manual mode.
Remote activation of manual mode is indicated by the appearance of the
the display.
The target temperature is set by the user during the last use of the device in manual mode.
The program remains active until different programming is done manually on the device
or until a new remote command is received, which will return the device to the program
in place prior to receiving the first message.
Remotely activating a special manual fixed-period program
It is possible to memorise 2 manual fixed-period programs that can be activated remotely,
one for HEATING mode and one for COOLING mode.
The remote activation of the timed manual program is indicated by the appearance of
the symbol on the display.
The program remains active until different programming is done manually on the device .
Upon completion of the manual fixed-period program, the device will return to the program
in place prior to receiving the first message.
The default setting of the manual fixed-period program is:
1 hour at 20 °C in HEATING mode,
1 hour at 24 °C in COOLING mode.
N.B. When the program is activated remotely, the remainder of the hour or day is counted
as a complete hour or day.
symbol on