CAME BPT TH/350 Manuel D'installation Et D'utilisation page 55

B
C
The program composed in this way is activated immediately and remains active until the
set time runs out. The device then goes back to operating in the mode it was in before
the activation of the timed manual program.
To go back to AUTOMATIC operation before the end of the programmed time, press .
Changing the temperature sensor calibration
If the device is in a position that means that it is difficult for it to detect the correct
temperature, it is possible to modify the temperature detected by ± 3 °C in increments
of a tenth of a degree.
A
Press and use the
tons to set the desired activation
times B.
Press again and use the
buttons to set the desired activa-
tion days C.
Pull out the unit body.
Activate MANUAL operating
mode.
Press button P A.
but-