Maintenance, Overhaul, Repair; Maintenance; Overhaul; Repair - Stahl 8146/1 Serie Mode D'emploi

Maintenance, Overhaul, Repair

US
8 Maintenance, Overhaul, Repair
US
 Observe the relevant national standards and regulations in the country of use.
US
8.1

Maintenance

US
Check the following points in addition to the national regulations:
US
• Whether the clamping screws holding the electrical lines fit securely
US
• Whether the device enclosure and/or protective enclosure has/have cracks or other visible
signs of damage
US
• Whether the permissible temperatures are complied with
US
• Whether the parts are securely fastened
US
• Ensure it is being used as intended
US
8.2

Overhaul

US
 Perform maintenance on the device according to the applicable national regulations and
the safety notes in these operating instructions ("Safety" chapter).
US
US
8.3

Repair

US
 Repair work on the device must be performed only by R. STAHL.
 Any damaged parts of the device or a damaged device must be replaced promptly to
US
ensure the electrical safety and explosion protection of the system.
US
US
9

Returning the Device

US
 Only return or package the devices after consulting R. STAHL!
US
Contact the responsible representative from R. STAHL.
US
R. STAHL's customer service is available to handle returns if repair or service is required.
US
US
 Contact customer service personally.
US
or
US
US
 Go to the r-stahl.com website.
 Under "Support" > "RMA" > select "RMA-REQUEST".
 Fill out the form and send it.
You will automatically receive an RMA form via email. Please print this file off.
 Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
32
Terminal Boxes
Series 8146/1, Series 8146/2
137216 / 8146626300
2021-01-08·IO00·III·en·09