Declaration Of Conformity; Déclaration De Conformité; Prohlášení O Shodě - Beko DRYPOINT M PLUS Instructions De Montage Et De Service

EN | FR | CS
Instructions for installation and operation | Instructions de montage et de service | Návod k instalaci a obsluze

9. Declaration of Conformity

BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss
GERMANY
Tel: +49 2131 988-0
www.beko-technologies.com
We hereby declare that the products indicated hereafter comply with the stipulations of the relevant directives and
technical standards. This declaration only refers to products in the condition in which they have been placed into
circulation. Parts which have not been installed by the manufacturer and/or modifications which have been
implemented subsequently remain unconsidered.
Product designation:
Models:
Supply voltage versions:
Max. operating pressure:
Product description and fuction:
Low Voltage Directive 2006/95/EC
Applied standards:
The devices with working voltage of 24 VAC and VDC are not in the scope of the Low-Voltage Directive.
ROHS II-Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction of the
use of certain hazardous substances in electrical and electronic devices.
The manufacturer shall have sole responsibility for issuing this declaration of conformity.
Neuss, 10.04.2018
DRYPOINT DM 10-34 C-N, DM 10-41 C-N, DM 10-47 C-N, DM 20-48 C-N, DM 20-53 C-N, DM 20-60 C-N, DM 20-67 C-N,
DM 40-61 C-N, DM 40-75 C-N, DM 40-90 C-N
9. Déclaration de
Conformité
EC Declaration of Conformity
DRYPOINT
DM10...V21, DM20...V21, DM40...V21
24VDC, 24VAC, 110VAC, 230VAC
16bar @ +2 up to +70°C (DM10 ...V21 and DM20...V21)
16bar @ up to +2 bis +60°C (DM40...V21)
Membrane dryer for compressed air pressure dew point
lowering with purge air switch
EN 61010-1:2010, EN50178:1997, EN 60664-1:2007,
EN 60204-1:2006
Signed for and on behalf on:
BEKO TECHNOLOGIES GMBH
i.V. Christian Riedel
Head of Quality Management International
9. Prohlášení o shodě
M
®
37