Installation And Operation; Start-Up - Bartscher MX 235 Plus Mode D'emploi

5. Installation and operation

5.1 Start-up

CAUTION!
The device may be operated only by the authorized and properly trained
personnel, having sufficient technical experience.
Before switching the device on:
thoroughly read the technical manual;
-
become familiarized with the safety and protective devices,
-
as well as their locations and mode of operation.
The use of the device parts and its components designed for safety and protection
by unauthorized persons may cause malfunctions or hazards for the operator.
The operator must be properly trained, informed about the residual risk and
correct operation of the device.
Assembly / disassembly
WARNING
All operations related to the assembly / disassembly of
each device part must be performed with motor turned off
and plug removed from the socket.
The assembly of the device consists of a view steps:
1. Place the retaining flange (7) of the
mixing stick (8) on the quick coupling
(6) of the device body (1).
2. Rotate the mixing stick (8)
counterclockwise, so it is tightly
connected with the device body (1).
NOTE!
Follow the instructions on the device body!
- 38 -
1
6
8
2
4
7