InnoCigs Steamax AL85 Manuel D'utilisation page 69

STEAMAX AL85 – SELECTION & OPERATING OF THE MENUS
In "TEMP MODE, " press the fire button to select the "STRENGTH" of the pull between 6 and 85 watts. Then
select the coil type of your atomizer head TC-Ni (Nickel200), TC-Ti (titanium) or TC-SS (stainless steel) and
adjust the temperature coefficient of the resistor by pressing the adjustment buttons.
Press the Fire button in "MEMORY MODE" to select the "STRENGTH" of the pull from the range of HARD, SOFT
or NORM. In "MEMORY MODE, " select the power settings M1 to M8. Close your selection and return to the main
menu by pressing the Power button.
Menu 2 – Manage Number of Puffs
When you select Menu 2, the symbol will be shown on the display. Just wait 5 seconds or press and hold
down the Fire button to enter the submenu displaying the current and maximum number of puffs. Press the
"UP" or "DOWN" button to adjust your settings:
In the "MAX" submenu, set the maximum number of puffs between 0 and 999.
"NEVER" represents an unlimited number of puffs. "ALREADY" represents the puffs already made. You can reset
the counter reading by waiting for 5 seconds until "PUFFS RESET Y/N" appears on the display. Select Y to reset
it to 0.
67
www.steamax.com