Connecting To Computer Devices - JVC D-ILA DLA-G20U Mode D'emploi

Connecting to Various Devices (Cont.)

Connecting to Computer Devices

Before connection, be sure to turn off both the projector and computer devices.
• Read the manual which comes with each device thoroughly.
Connection to an IBM PC or IBM-compatible computer
• Use the supplied computer connection cable. Also, prepare cables required for connecting the devices connected.
• Desktop type
To monitor connector
• Note type
* There are some note types which do not allow the computer's
LCD to work if an external display is connected. With such a note
type, the LCD display and external display output need to be
switched.
• Desktop type
• RGB output devices
Laser video disc player, etc.
22
Computer cable (supplied)
Separate cable
(separately available)
To monitor connector
When connecting an audio output terminal such as a computer sound
source to the projector, connect to the AUDIO terminal using the supplied
audio cable.
To R
To G
To B
To R
To G
To B
* When a monitor is connected to the
To H/Cs
To V
To COMPUTER IN-1
AUDIO
PC
AUDIO
R
G H/C
S
V
B
COMPUTER
OUT
RS-232C
Cable supplied with the
display (or separately
available)(D-sub 3-row
15-pin)
POWER
Display monitor
COMPUTER OUT terminal, you can view
the video from the computer on the
monitor.
Y/C
AUDIO
L
R
REMOTE