Data - Robert Juliat Roxie Manuel

3.2.3 Data

Protocol
USITT DMX 512-A
PIN # DMX
1 Shielding
2 DMX (-)
3 DMX (+)
4 Not used
5 Not used
Integrated terminal plug:
If no XLR connector is detected on DMX OUT connector, a 120Ω terminal plug is
automatically activated. Additional terminal plug on the last unit is not necessary.
• Protocol: Wireless Solution W-DMX™
• Refer to the OEM User's manual for general recommendations and
use of the transmitter:
• The antenna must be clearly visible from the transmitter
• See 5.1.2 for activation
• Do not connect a DMX IN data cable in case of wireless DMX use
DMX mode: The first unit receives the DMX signal via the wireless network, then all the
other units are connected on the first one via DMX data cable.
Input connector
XLR 5-pin
DATA connectors
Foil & Braided Shield
1 st conductor of 1
2 nd conductor of 1
1 st conductor of 2
2 nd conductor of 2
Wireless DMX option
http://www.wirelessdmx.com
IN OUT
DATA
Description
st twisted pair
st twisted pair
nd twisted pair
nd twisted pair
Maximum :
32 units
IN
EN - 8 -
Output connector
XLR 5-pin
DMX OUT DMX IN
OUT IN
etc.
EN