Troubleshooting - Breville 800BLXL/B Livret D'instructions

DO'S AND DON'TS
unplug the cord. Remove a portion of
the mixture from the blender jug before
continuing.
• Do not place hot or boiling ingredients
into the Breville Die-Cast Hemisphere
Blender™; allow to cool before placing
into the blender jug.
• Do not place the Breville Die-Cast
Hemisphere Blender™ near the edge
of a bench or table during operation.
Ensure that the surface is level, clean and
free of water, fl our and other substances.
Vibration during operation may cause the
appliance to move.
18

TROUBLESHOOTING

POSSIBLE PROBLEM EASY SOLUTION
• Check that the blender jug and lid are securely
locked into position.
• Check that the blade assembly is correctly
attached to the base of the blender jug.
Motor doesn't start or
blade doesn't rotate
• Check that the 'Power' button and selected
function or speed setting is illuminated.
• Check that the power plug is securely inserted
into the power outlet and switched on
• Either too much food is being blended at one time
or the pieces are too large.
Food is unevenly Try cutting food into smaller pieces of even size
chopped and processing a smaller amount per batch.
For best results, the food should be chopped into
pieces no larger than ¾ inch.
Food is chopped too • The food is over processed. Try using the Auto
fi ne or is watery Pulse function or process for a shorter time.
Food sticks to blades • The mixture may be too thick. Try adding more
and jug liquid to the mixture and/or use another function.
• The motor is being overloaded. Unplug the
LEDs start to fl ash and
blender from the power outlet and wait 30
buttons do not respond
minutes or longer.
19