Breville 800BLXL/B Livret D'instructions page 6

OPERATING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™
3. Twist the Blade Removal System
counterclockwise until fi rmly screwed
into position.
4. Place the motor base on a fl at, dry
surface such as a bench top. Ensure
that the motor base is switched off at
the power outlet and the power cord
is unplugged. Turn the blender jug
upright and insert on to the motor base.
The handle of the blender jug can be
positioned to the left or right hand side of
the appliance.
5. Plug the power cord into a 110/120v
power outlet.
10
Using the blender
1. To turn the blender on press the 'Power'
button on the far left of the control panel.
The 'Power' button will illuminate and
fl ash indicating the blender is powered
on. When the jug is placed on the base
all lights will illuminate signalling the
blender is ready for use.
NOTE:
When using your Breville Die-Cast
Hemisphere Blender™ for the
fi rst time, you may notice an odor
coming from the motor. This is
normal and will dissipate with use.
2. Add food or liquid into the blender jug
ensuring not to exceed the 'MAX' mark.
3. Place the blender lid fi rmly into position
on the top of the blender jug. If not
already in place, insert the clear inner lid
into the blender lid and turn clockwise or
counterclockwise to lock into position.
OPERATING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™
NOTE:
When the blender jug is fi lled at
or near the 'MAX' line, place one
hand on the blender lid to avoid
displacement of the lid during
operation. Do not blend hot
ingredients, allow to cool before
placing into the blender jug.
The Breville Die-Cast Hemisphere
Blender™ features a patent pending assist
lid. This allows the lid to fi t tightly onto the
blender jug, avoiding displacement during
operation. The ring pull design allows the
user to easily remove the lid with a simple
leverage action.
4. Select the required speed (Blend,
Smoothie or Ice/Auto Pulse) by pressing
the corresponding speed button. The
blender will start to operate and only the
selected speed button will illuminate. The
'Power' button will continue to fl ash.
NOTE:
Operate the blender only for
the appropriate amount of time
required. The Die-Cast Hemisphere
Blender™ will automatically stop
blending on the Blend function and
on the Smoothie and Ice/Auto Pulse
functions to avoid over processing.
The speed can be changed at any time
during the blending process. Each time
a new speed is selected its button will
illuminate and the previous speed button
illumination will go out.
5. For ice-crushing or ingredients that
require short bursts of power, select the
Ice/Auto Pulse button. The blender will
start to operate and the Ice/Auto Pulse
button will illuminate.
The 'Power' button will continue to fl ash.
The pre-programmed functions have
been designed to run for a specifi c time.
Function Programmed Time
Blend 60 Seconds (1 minute)
Smoothie 60 Seconds (1 minute)
Ice/Auto Pulse 60 Seconds (1 minute)
NOTE:
The smoothie function has a unique
processing technique that blends
the denser ingredients at a lower
speed, then increases as ingredients
thicken. This may happen several
times while blending smoothies.
6. To stop blending at any time, press the
selected speed button. The 'Power'
button can also be pressed.
11