Troubleshooting - Breville Fresh & Furious Manuel D'instructions

Troubleshooting

PROBLEM
Motor doesn't start or
blade doesn't rotate
Food is unevenly
chopped
Food is chopped too
fine or is watery
Food sticks to
blade and jug
Blender overloaded
EASY SOLUTION
•
Ensure that the blender jug and lid are securely into position.
•
Verify that the ON | OFF button and selected function or speed setting is
illuminated.
•
Check that the power plug is securely inserted into the power outlet.
•
Either too much food is being blended at one time or the pieces are too large.
Try cutting food into smaller pieces of even size and processing a smaller
amount per batch.
•
For best results, the food should be chopped into pieces no larger than 1 inch.
•
Try blending for shorter period of time. Use the AUTO PULSE /ICE CRUSH
function for
better control.
•
The mixture may be too thick. Try adding more liquid and/or using a slower
speed for blending.
•
Your blender features motor protection. If the motor is being overloaded
the motor will stop and the overload warning icon on the LCD will start to
flash. If your blender stops operating and the "OVERLOAD PROTECTION"
is flashing, unplug the blender and wait for 30 minutes until the motor has
cooled off. Once cooled, you will be able to use the blender as usual again.
•
We recommend removing a portion of the mixture, cutting food into smaller
pieces or processing smaller amounts per batch.
15