Hamilton Beach OG02 Manuel D'assemblage page 14

ASSEMBLY
STEP 2: Left Panel
1. To attach left panel, align left leg holes with holes on left panel (marked "L") as shown in
Fig. 2.
2. Attach left-front leg (marked "Left Front") and left-back leg (marked "Left Back") to left panel
with eight (8) M5 x 10 screws as shown in Fig. 2.
STEP 3: Right Panel
1. To attach right panel, align right leg holes with holes on right panel (marked "R") as shown in
Fig. 3.
2. Attach right-front leg (marked "Right Front") and right-back leg (marked "Right Back") to right
panel with eight (8) M5 x 10 screws as shown in Fig. 3.
14
ASSEMBLY STEPS
Fig. 2
Fig. 3