Hamilton Beach OG02 Manuel D'assemblage page 11

ASSEMBLY
STEP 3:
1. Open grill lid, as shown in Fig. D, and take out the small boxes packed within the grill head.
Remove all packing materials and remove all parts from boxes as shown in Fig. D.
NOTICE: If there is any resistance during the process of opening the lid, it is mostly likely due
to the styrofoam shown in Fig. D. While using one hand to open the lid, use the other hand to
hold the styrofoam in place (i.e., to keep it from wanting to move with the lid). This should
make the lid easier to open.
Fig. D
Side-Burner
Assembly
Side-Burner
Grid
Toolbox
Bracket
Left- and
Right-Side
Shelf
Support
Left-Side
Shelf
BEFORE THE ASSEMBLY
Culinary
Basket
Bracket
Tank
Baffle
Styrofoam
Box
Culinary
Tray
Styrofoam
Grill Head
Heat Diffusers
Box
Hardware
Pack
Culinary
Baskets
Cardboard
Cardboard
Casters
Toolbox
Left- and
Right-Side
Shelf Wall
Cooking
Grate
11