Assembly Steps - Hamilton Beach OG02 Manuel D'assemblage

ASSEMBLY
STEP 1: Bottom Shelf
1. Attach the tank holder to the bottom shelf with two (2) cotter pins as shown in Fig. 1a.
2. Attach the casters to the bottom shelf with sixteen (16) M6 x 13 screws as shown in Fig. 1b.
3. NOTE: Use care when installing each caster into the correct position.
Swivel Caster
With Brake

ASSEMBLY STEPS

Fig. 1a
Standard
Caster
Fig. 1b
Swivel
Caster
13