Hamilton Beach OG02 Manuel D'assemblage page 12

ASSEMBLY
PLEASE READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY
Tools Required:
• #2 Phillips screwdriver and needlenose pliers (not provided)
• The following hardware is provided in the blister pack:
M4 x 10 Screw (10)
1.3 x 26 Cotter Pin (2)
M6 x 13 Screw (S.S.) (2)
Match Holder Bracket (Nylon Knot) (1)
12
BEFORE THE ASSEMBLY
STEP BY STEP
M4 x 12 Screw (3)
M5 x 10 Screw (39)
M6 x 13 Screw (28)
M4 Compression Washer (4)
M5 x 15 Screw (4)
M6 Compression Washer (4)
Match Holder (1)