Hamilton Beach OG02 Manuel D'assemblage page 10

ASSEMBLY
STEP 2:
1. With the aid of an assistant, turn grill head over on its side as shown in Fig. B below and
remove the top Styrofoam piece. Lay the Styrofoam piece flat on the floor. With the aid
of an assistant, lift the grill head out of the bottom Styrofoam piece. Place the grill upright
on the other styrofoam piece as shown in Fig. C.
NOTICE: DO NOT place the grill head directly on the floor or the grease tray could become
bent.
Grill Head
10
BEFORE THE ASSEMBLY
Fig. B
Fig. C
Styrofoam