Forch Full Torque Mode D'emploi page 68

A8 2
1
A11
2. Pictured components
A1-1 Protective cover
A1-2 Additional handle
A1-3 Retaining screw for acrylic glass protective cover
A1-4 Electronic signal indicator
A1-5 Handle
A1-6 Retaining screw for the accessory
A1-7 Mandrel 19 mm (with 2 feather keys)
A1-8 Acrylic glass protective cover
A1-9 Adjusting wheel for speed adjustment
A1-10 Trigger switch
A2-1 Dust Prevent System
A2-2 Spindle spindle lock button
A2-3 Spacer rings (for accessories shorter than the mandrel)
3. Intended use
The polishing machine is suitable for:
■
glazing, matting, texturing and brushing,
■
smoothing and polishing,
■
sanding and deburring of the following materials:
- metal, wood and plastics.
The electric tool is only suitable for dry processing. The user is liable for all damage caused
by improper use. The user must comply with the generally applicable accident prevention
regulations and the safety information provided.
1
A9
A10
A12
2
1