Forch Full Torque Mode D'emploi page 69

4. Symbols
Warning against general hazards
Warning against electric shock
Read the operating instructions and safety information
Wear hearing protection
Wear protective gloves
Wear breathing protection
Wear protective goggles
Wear protective footwear
Do not dispose of with household waste
Tip, information
CE labelling: Verifies the conformity of the electric tool with the directives of the
European Community.
5. General safety information
– Please read all the safety information and instructions. Failure to comply with the
safety information and instructions may lead to electric shock, fire and/or severe injury.
Save all the safety information and instructions for future reference. Only pass the electric tool
to new ownership together with these documents. The term "electric tool", which appears in
the safety information, refers to mains-powered electric tools (with power cable).
Observe the accompanying brochure
"General Safety Information for Electric Tools".
6. Special safety information
6.1 General safety information on grinding, sanding, working with wire brushes,
polishing and cutting:
■
This electric tool is designed for use as a sanding machine, wire brush and polishing
machine. Observe all the safety information, instructions, diagrams and specifications
received with the device. Failure to observe the following instructions may lead to electric
shock, fire and/or severe injury.
■
This electric tool is not suitable for grinding or cutting. Using the electric tool for purposes
it is not intended for may cause accidents and/or injury.