Operating Instructions - Uberhaus PH-822 Guide De L'utilisateur

Be sure to plug into a 120 V AC, 60 Hz outlet.
1. Turning unit ON/OFF
a. Press the
be on at the low output setting and the "LO" indicator will light. At this
setting, the heater output is 750 W.
b. Press the
2. Select working MODE:
You can select the mode by rotating the mode knob.
a. (LOW) MODE: heater will work continuously and the output will be
750 W at all times.
b. (HI) MODE: heater will work continuously and the output will be
1500 W at all times.
c. Comfort Setting mode (18
Rotate mode knob to your desired temperature. There are three distinct
0
settings: 18 C, 21
the output power to accommodate your temperature setting. When the room
air temperature reaches your desired temperature, the unit will automatically
lower the output power to maintain your space at the desired temperature.
1. Room temp＜Setting temp, output power is 1500 W at all times.
2. Setting temp ≤ Room temp＜Setting temp +2
from 1500 W to 750 W
3. Setting temp +2
3. AUTO-OFF TIMER (
When the heater is in use, you can set the timer for turning off the unit. Press the
or button to set the timer between 0.5 and 7.5 hours in 0.5 hour intervals.
When the time runs out, the heater will turn off automatically.

OPERATING INSTRUCTIONS

button once and rotate the mode knob once: the heater will
button again to turn heater off.
0
C, 21
0 0
C and 24 C. In this mode, the heater will automatically select
C ≤Room temp, heater will stop heating.
0
and button)
0 0
C, 24 C):
0
C, output power changes
6