further use of the heater. Plugging heater into a worn outlet may result in overheating
of the power cord or fire.
17. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it
over.
18. We do not recommend use of an extension cord as it may overheat and cause a risk
of fire. However, if you have to use an extension cord, the cord should be No. 14
AWG minimum size and rated not less than 1875 W, and has to be used only for
supplying power to this heater.
19. Be sure that the plug is fully inserted into appropriate outlet. Please remember that
outlets also deteriorate due to aging and continuous use: check periodically for signs
of overheating or deformation of the plug. Do not use the outlet and call your
electrician.
20. Check that neither the appliance nor the power cable has been damaged in any way
during transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left
between elements of the appliance. It may be necessary to pass over the appliance
with a vacuum cleaner.
22. Always plug heater directly into a wall outlet/receptacle. Never use with an extension cord
or relocatable power tap (outlet/power strip).
CAUTION: This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance
by a person responsible for their safety
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
4